EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Photo voltaic Demand Controller can be a really efficient solar controller made for off-grid solar programs. Based on multiphase synchronous rectification engineering, it makes certain optimized Electricity conversion and procedure steadiness for a wide range of photovoltaic (PV) applications.
Key Attributes in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Demand Controller know-how for top-quality photo voltaic Electrical power harvesting. Key features include:
Multiphase Synchronous Rectification (MSR) for improved energy conversion.
Sophisticated MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for enhanced battery lifestyle.
LCD Display with actual-time information monitoring.
Numerous Load Manage Modes like guide and timer.
Extensive Digital Protections towards overcharging, above-discharging, brief circuits, and reverse polarity.
Stage-by-Step Guide to Establishing the EPEVER Tracer AN Series Controller
1. Unboxing and Preparing the Controller
Be certain all factors are involved: Tracer AN device, temperature sensor, communication cables, and consumer handbook.
Validate the product quantity and voltage scores match your photo voltaic panel and battery requirements.
two. Mounting the Charge Controller
Choose a nicely-ventilated, dry area near to the battery lender.
Protected the Tracer AN controller using the furnished mounting brackets.
Keep right clearance for warmth dissipation.
three. Wiring the Solar Cost Controller
Caution: Often abide by suitable protection visit here protocols and make sure the process is driven off just before connecting elements.
Stage 1: Hook up the battery terminals into the cost controller (constructive to optimistic, unfavorable to unfavorable).
Move two: Link the solar panel array to the PV enter terminals.
Phase 3: Join the load terminals if employing a direct load connection.
Move four: Double-Examine all connections for polarity and tightness.
four. Configuring the Controller Configurations
Electrical power around the controller by connecting the battery to start with.
Make use of the LCD Display screen to navigate the options menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, light Command.
5. Monitoring and Facts Logging
The Tracer AN Series supports serious-time checking using the MT50 distant meter.
Knowledge could be logged through the RS485 communication port using software package including Solar Station PC.
Distant monitoring is achievable With all the EPEVER WiFi module.
six. Troubleshooting Frequent Issues
Situation 1: No Electric power Output
Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern two: More than-Voltage Protection
Confirm the photo voltaic array’s voltage score.
Modify method parameters if vital.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations inside the menu.
Great things about the Tracer AN Series with MSR Technological know-how
The multiphase synchronous rectification engineering makes sure:
Larger Performance: Decreased Electricity losses through conversion.
Enhanced Dependability: Secure overall performance underneath variable loads.
More time Battery Everyday living: Steady and exact charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technologies is really an exceptional choice for optimizing solar energy technology and lengthening battery everyday living. By subsequent the above mentioned set up tutorial, users can make certain utmost efficiency and program longevity.